Answer: In this situation, it may be that the data cable of the emulation floppy drive and the computer embroidery machine is connected upside down.

Use our software to format the U disk on the computer from the beginning, save it into the pattern, and insert the simulation floppy drive to read from the beginning.After the USB port of the computer embroidery machine is inserted into the floppy disk, the red light on the floppy disk will go out after only one flash, and the new pattern cannot be displayed when the disk is read. What might be the reason? Remove the USB flash drive and insert it from the beginning.

After the simulation floppy drive is installed, there is no read/write or format operation, but the red and green lights are both on. ​ Under the folder of the U disk, no files are displayed when reading the U disk. You need to turn off the power and connect the data cable in China Embroidery machine the correct way from the beginning.

After connecting, start from the beginning, and then the simulated floppy drive should be able to start and use normally. Perhaps the format of the U disk is incorrect, and the floppy drive cannot read the embroidery trick from the U disk. Why? Answer: The U disk drive does not support identifying folders. All the pattern files must be placed directly in the root directory of the U disk

Megosztás a facebookon